Series 65 Conventional Detectors

The Series 65 Optical Smoke Detector uses a pulsing LED and Photo Diode in the sensing chamber to detect slow burning and smouldering fires. The Indicator LED is clear in quiescent state but produces a red light in alarm condition. Responds well to slow...

The Series 65 Rate of Rise Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. Can be used for applications where smoke detectors are unsuitable Idea for...

The Series 65 Rate of Rise Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. Can be used for applications where smoke detectors are unsuitable Idea for...

The Series 65 Rate of Rise Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. Can be used for applications where smoke detectors are unsuitable Ideal for...

The Series 65 Static Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. Can be used for applications where smoke detectors are unsuitable Idea for...

The Series 65 Diode detector base is designed for use with all the Series 65 detectors. This base has the Schottky diode on the 'L1 IN' and 'L1 OUT' wiring terminals to maintain the integrity of the circuit during unauthorised removal of a detector...

The Series 65 compact UV Flame Detector is designed to protect enclosed indoor areas where open flaming fires may be expected. The detector has a fast acting response to flames up to 25m away and is equipped with a single UV sensor with a narrow spectral...

The Series 65 Ionisation Smoke Detector uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chamber and causing a current flow. If smoke enters the chamber, the current flow is reduced leading to an alarm. Responds...

Conventional smoke detectors housed in an attractive white polycarbonate case Packaging designed to act as dust cover until commissioning of system Externally visible LED illuminates when detector changes to alarm state Approved to EN54-7:2000 9-33v...